TECHNICAL |
SPECIFICATIONS |
POWER |
Guide No. (ISO100).meters |
ZOOM |
Zoom head |
Focal length coverage Coverage with wide panel Auto zoom for sensor size |
FLASH MODES |
Auto exposure control |
High speed sync (FP) Manual / output settings Manual steps |
Continuous shooting priority (CP) mode |
Continuous flashes in a burst Strobe / output settings Stroboscopic Frequency |
FLASH-RELATED FUNCTION FE lock |
FE memory |
Flash exposure compensation |
Flash exposure bracketing Second-curtain flash sync Modelling flash |
Modelling lamp |
Colour temperature info communication |
WIRELESS FLASH Transmitter Transmission type Transmitter range Receiver |
Max. number of Transmitters / Receivers |
No. of groups |
No. of channels |
LINKED Remote Shutter Release |
FLASH HEAD MOVEMENT Up |
Down |
Left |
Right |
60 (200mm) |
Auto/Manual 24-200mm 14mm |
Yes |
E-TTL II / E-TTL |
Yes |
Yes - 1/1 to 1/10241 1/3-stops |
- |
Maximum at full power: Approx. 852 Yes - 1/4 - 1/1024 |
1 - 500Hz |
Yes Yes |
±3 stops |
±3 stops |
Yes (including wireless)3 |
No (supported as off-camera receiver unit only)4 Yes, 2 x White LED |
(user selectable duration and 5 brightness levels) Yes |
Yes |
Radio only |
30m (approx.)5 |
Yes |
15 / 15 (16 in total of any combination) |
5 (A/B/C/D/E) Auto, 1-15 Yes |
45, 60, 75, 90, 120 ° |
7° |
60, 75, 90, 120, 150 and 180 ° 60, 75, 90, 120, 150 and 180 ° |
AF ASSIST |
AF-assist beam |
Number of AF points supported (infrared) AF-assist range (at centre) |
POWER SOURCE |
Battery |
Battery level indicator Minimum recycling time No. of flashes |
(fully charge battery) External power supply |
CONSTRUCTION |
Dust and water resistance Active cooling |
Mount type supported |
MISC. |
Custom Functions (C.Fn) / Personal Functions (P.Fn) Flash settings from camera menus |
PC terminal |
ACCESSORIES Included |
Optional |
DIMENSIONS & WEIGHT Size(WxHxD),mm Weight, grams |
Footnotes |
Dual white LED lamp6 n/a |
Approx. 0.6-10m |
Rechargeable Lithium-ion Battery Pack LP-EL Yes - 5 levels / percentage |
Approx. 0.1-1.2 sec2,7 |
Approx. 350 (at full power)2 |
No |
Yes |
No - Enhanced passive cooling design Multi-Function Shoe8 (Gold plated terminals) |
11xC.Fn/8xP.Fn |
(plus 3 x Custom Modes (C1, C2, C3)) |
9 |
Yes - On-flash Menu Direct button |
No |
Battery Pack LP-EL |
Speedlites Case |
Mini Stand |
Mounting foot cover |
Battery Charger LC-E6E |
Car Battery Charger CBC-E6 |
Speedlite Transmitter ST-E10 (Multi-Function foot) Speedlite Transmitter ST-E3-RT (Ver.2) |
(Standard 5-pin foot) |
EX series Speedlites with radio receiver function |
Approx. 80.2 x 139.9 x 123.3 mm Approx. 491g (body only) |
1 Minimum flash output is 1/128 for high-speed sync. |
2 Using a fully charged LP-EL battery under Canon testing conditions. Continuous flash count |
at full output until flash firing restriction Level 1. |
3 With compatible cameras/devices and not available with stroboscopic shooting. |
4 Modelling flash is available when being used as a receiver used both with other Speedlites |
featuring sender functionality and with cameras supporting modelling flash that are equipped with a conventional accessory shoe, such as the EOS-1D X Mark III. In this kind of arrangement, modelling flash can be activated from the camera (by using the DOF preview button). |
5 Without any obstructions between sender and receiver, and without external radio interference. Arrangement of units and other external factors may affect the range/performance. |
6 With compatible cameras, the Speedlite automatically adjusts the LED intensity depending on scene brightness. Automatically switches to intermittent mode if the internal temperature rises during LED AF-assist beam firing. |
7 1/1024 to 1/1 power charging time required for firing. |
8 For use with compatible cameras with Canon's Multi-Function shoe, a firmware update may |
be required. Note, not all functions may be supported with all cameras (the EOS R5 C and |
camcorders with the Multi-Function shoe are not supported). 9 With compatible cameras. |