Rode Stereo VideoMic Pro

Rode Stereo VideoMic Pro


Share

Rode Stereo VideoMic Pro

Rode Stereo VideoMic Pro
Product Code: RODESVMP
Barcode/EAN: 698813004805
Black
219.99
Qty    
Rode Stereo VideoMic Pro + Deadcat VMPR kit
Black
239.99
Qty    

Ideal for Video & DSLR Cameras
Integrated Shoemount/Shockmount
Level Switch: -10dB / 0dB / +20dB
High-Pass Filter Switch: 75Hz
Durable Multi-Strand Cable
1/8" (3.5mm) Output Connector
9V Battery Powered

The Rode Stereo VideoMic Pro builds on the success of the Rode VideoMic Pro & Stereo VideoMic with improved stereo reproduction, sound quality and ergonomic design. The Stereo VideoMic's capsule feature a matched pair of 1/2" cardioid condenser capsules, mounted in a coincident X/Y position for accurate stereo imagery and detail. The microphone's small, ergonomic footprint features an integrated shock mounting system for superior isolation from vibration and mechanical noise. The multi-strand output cable is terminated with a 1/8" (3.5mm) output connector and delivers significantly lower noise transference than traditional audio cable.

The included shoe mount features an integrated shockmount system for even further protection against handling noise. The Stereo VideoMic features a high pass filter switch at 75Hz for minimizing low frequency noise, and a -10dB Pad for maximizing headroom for capturing loud signals without distortion. The +20dB level boost switch is specifically designed to provide a higher quality signal with DSLR cameras. When activated, camera preamp level is reduced, resulting in a lower noise floor and much clearer recording.

Broadcast recording quality on-camera microphone
Matched pair 1/2" condenser capsules in XY stereo configuration
Ultra lightweight, compact form factor
Two step High Pass Filter (flat, 75Hz)
Three position level control (-10dB, 0, +20dB)
9V battery powered - over 100 hours use (alkaline)
Integrated shock mounting
Integrated foam windscreen
3.5mm stereo mini-jack output
Billeted metal camera shoe mount with 3/8" thread for easy boompole mounting

Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter
Capsule 0.50"
Polar Pattern Cardioid
Address Type End
Frequency Range 40Hz - 20kHz
Output Impedance 200Ω
Maximum SPL 134dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 20dB-A
Power Options 9V Battery
Weight 115.00gm
Dimensions 130.00mmH x 66.00mmW x 108.00mmD
Output Minijack Output